Fischer Panda xControl Series User Manual

Panda xControl
Page 28 - Chapter 2: Panda xControl 29.9.16
2.7 Accessories:
Fig. 2.7-1: FP Bus Cable (15 m): 34.02.02.131HFP Bus Cable (15 m): 34.02.02.131H
Faults No contact Voltage Generator output
Broken Short circuit (%)/Load
OK Generator runs
AC Voltage Generator off
Run-up phase/Over-
ride
Generator start-up Temperature
Standby Engine
Automatic start-up. Exhaust system
Starter battery Winding
Operating hours Preheating
Oil pressure Speed/RPM
Self test Tank gauge %
Apparent power Starter turns
Example:
Error73: Error shutdown due to winding temperature
Symbol Description Symbol Description

Fischer Panda xControl Series Specifications

General

Brand	Fischer Panda
Model	xControl Series
Category	Controller
Language	English