EasyManuals Logo

Fischer Panda xControl Series User Manual

Fischer Panda xControl Series
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Panda xControl
Page 18 - Chapter 2: Panda xControl 29.9.16
Fig. 2.5.2.1-1: Sub-menu: IlluminationThe value is changed by using the "Step-up"/"Step-down"
keys and the setting is confirmed with the "Start/Stop - Enter“
key.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter“ key.
2.5.2.2 Setting the contrast of the CP-G
The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter“ key. The
respective menu item opens.
Fig. 2.5.2.2-1: Sub-menu: ContrastThe value is changed by using the "Step-up"/"Step-down"
keys and the setting is confirmed with the "Start/Stop - Enter“
key.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter“ key.
2.5.2.3 Setting the standby time of the CP-G
The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter“ key. The
respective menu item opens.
Fig. 2.5.2.3-1: Sub-menu: Standby TimeThe value is changed by using the "Step-up"/"Step-down"
keys and the setting is confirmed with the "Start/Stop - Enter“
key.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter“ key.
2.5.2.4 Setting the standby illumination of the CP-G
The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter“ key. The
respective menu item opens.
Fig. 2.5.2.4-1: Sub-menu: Standby IlluminationThe value is changed by using the "Step-up"/"Step-down"
keys and the setting is confirmed with the "Start/Stop - Enter“
key.
"Cancel" or "Confirm" can be selected by using the "Step-up"/
"Step-down" keys and then confirmed with the "Start/Stop -
Enter“ key.
2.5.2.5 Setting the display mode of the CP-G overview page
The menu item is selected by using the "Step-up"/"Step-down" keys confirmed with the "Start/Stop - Enter“ key. The

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fischer Panda xControl Series and is the answer not in the manual?

Fischer Panda xControl Series Specifications

General IconGeneral
BrandFischer Panda
ModelxControl Series
CategoryController
LanguageEnglish

Related product manuals