15
CONTROL PANEL
1
To turn your washer on, touch for 2
seconds. This will activate the control panel.
KEYLOCK will remain on but let you select
your wash cycle options and start the cycle.
To pause your washer at any time during the
cycle, touch
for 2seconds, or touch
twice in quick succession.
2
1
Touch for 2 seconds.
When activated, the light above the
button
is illuminated.
Time to go
Your CleanSmart™ washer displays approximately how many minutes the cycle has
remaining, so that you can tell at a glance when your washing will be finished. Once you
have selected your wash cycle and options, the time the cycle will take to complete will be
displayed. Please be aware that a number of factors influence the overall cycle time, eg the
water flow rate and load size and cycle selection, therefore times will vary.
Keylock
Keylock can be used to lock the buttons on your CleanSmart™ when not in use. This will
avoid accidental button pushes.
To turn Keylock
ON or OFF:
If Keylock is ON:
To Next Page
Loading...
Need help?
General
