6
Accessories
Check if you received the following accessories with your Fisher&Paykel washer. Youwill
find them inside the drum or attached to the packaging.
z
2 x inlet hose(s)
z
1 x drain hose guide
Unpacking
To ensure the best performance from your new washer please follow the instructionsbelow.
Removing the packaging
1 Remove the outer packaging.
2 Tilt the machine backwards and walk it off the base
packer one foot at a time (ensure the lid is still taped
down).
3 Remove the base packer from under the machine
bypulling it out the front.
4 Remove the tape, lift the lid and remove the bowl
packer from the bowl.
5 Remove the hoses and accessories.
6 Keep the base packer and bowl packer in case they
are required for future transit.
Ensure that the base packer has been removed before operating your machine.
INSTALLATION INSTRUCTIONS
To Next Page
Loading...
Need help?
General
