Fisher & Paykel CLEANSMART 7 Series User Manual

31
CHANGING PRE-SET OPTIONS
To enter Option Adjustment mode:
To change or reset any of the options, repeat the above steps.
1
Turn the washer on at the wall but do
not touch .
Touch
and together for 3seconds.
You will hear 3quick beeps indicating you
have entered Option Adjustment mode. The
washer will show the default setting for the
cold wash temperature.
2
+
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Use the dial and buttons on the control panel
to make your changes to the pre-set options.
3
Touch to return to normal mode when
you have finished modifying your options.
Your washer will automatically remember
your changes.
+
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
+
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
ICON DEFAULT
CUSTOMISED
FUNCTION
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Heavy Wash Temp
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Handwash
OOB
Recovery
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Sheets EOC Beeps
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Easy Iron Factory Reset
Option Adjustment mode
After using your washer a number of times
you may want to fine tune some of the
options to suit your wash needs.
There are a number of pre-set options,
which can be changed:
1 The wash temperatures, including
changing the
COLD wash temperature to
CONTROLLEDCOLD.
2 The out of balance recovery routine.
3 The number of beeps at the end of the
cycle.
4 Resetting to factory default settings.

Fisher & Paykel CLEANSMART 7 Series Specifications

General

Brand	Fisher & Paykel
Model	CLEANSMART 7 Series
Category	Washer
Language	English