32
Wash temperatures
All wash temperatures can be individually adjusted if you think they are too hot or too cold.
The hot temperature will be the same as the hot water supply temperature.
To modify the wash temperature:
CHANGING PRE-SET OPTIONS
1
1
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Factory Reset
EOC Beeps
Wash Temp
OOB Recovery
Enter the Option Adjustment mode,
refer to the ‘Option Adjustment mode’
for instructions.
The diagram shows how the wash cycle icons
relate to the pre-set options you can change.
It also shows what will be displayed when you
first enter Option Adjustment mode. Options
you can change are accessible using the
HEAVY, HANDWASH, SHEETS and EASY IRON
cycles only.
Enter the Option Adjustment mode, refer
to the ‘Option Adjustment mode’ for
instructions.
Select the
HEAVY cycle.
2
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Use the DELAY START, MORE button on the
panel to scroll through the available settings
of your selected option, eg to increase or
decrease the temperature of your warm wash
temperature, or to change the number of
beeps at the end of the cycle.
Adjusting your options
To Next Page
Loading...
Need help?
General
