12
BEFORE YOUR FIRST WASH
CleanSmart™ capacity
CleanSmart™ offers a very generous 10 kg capacity. The list below outlines what is included
in a 10kg wash load (in accordance with AS / NZS 2040.1:2005).
The above load composition is indicative only. We recommend for everyday use that you
separate out your sheets and towels and wash them separately on the
SHEETS and TOWELS
cycle.
WASH LOAD - 10 KG QUANTITY
Sheets (double) 4
Bath towels 8
Tablecloths 3
Shirts 4
T-Shirts 6
Pillowcases 6
Shorts 6
Washcloths 4
Handkerchiefs 2
Check you have done everything you need to before you start your first wash:
Has the basepacker been removed?
Is the drain hose threaded through the hose guide ‘Ubend’ (with no more than 20
mm extended) and hooked into your standpipe or tub, or attached toa spigot?
Is the hot hose connected to the hot valve marked ‘H’?
Is the cold hose connected to the cold valve marked ‘C’?
Have the taps been turnedon?
Is the washer correctly levelled, feet are extended and cabinet corners are clear of
the floor?
Has the power cord been connected to an appropriate power supply andthepower
turned on?
Have you performed the installation test cycle (see previous page)?
To Next Page
Loading...
Need help?
General
