Fisher & Paykel DW60FC1 - Removing the Door Latch; Removing the Dertergent Dispenser; Removing the Flood Switch

31
8.6 Removing the Door Latch
8.7 Removing the Dertergent Dispenser
8.8 Removing the Flood Switch
• Remove the door panel, refer to section 8.4
• Remove the 2 screws retaining the door lock to
the inner door panel.
• Remove the harness to the door switch.
D
D
• Remove the outer door panel, refer section 8.4.
• Remove the harnesses to the detergent dispenser.
• Remove the 6 screws retaining the detergent
dispenser brackets.
• The detergent dispenser will now be able to be
removed through the inner door panel from the
inside.
• Remove the product from the joinery.
• Remove the base panel retaining screws. There
are 2 screws securing the flood switch to the
base panel.
• Remove the wiring to the microswitch.
• Remove the 2 hoses which are overflow tubes
from the front of the chassis.
• The flood switch is now free to remove.
• Reassemble in reverse order.
• The display module can now be slightly lifted
upwards and removed from the door panel.
• To remove the button chain, lift the plastic slide
in the middle, and lift upwards to remove from
the side clips.
8 SERVICING THE COMPONENTS
D