11
5.1.1 MOTOR
The motor is a 3 phase, 42 pole, DC brushless motor. Rotation of the motor is controlled by a
microprocessor located in the Motor Controller Module.
The Motor consists of a STATOR (stationary part) and ROTOR (rotating part).
5.1.2 ROTOR POSITION SENSOR MODULE
Fitted to the Stator is the Rotor Position Sensor Module. This detects the position of the rotor and
feeds a signal back to the Motor Controller Module.
To check the Rotor Position Sensor use a RPS tester part number 502105.
To Next Page
Loading...
