Fisher & Paykel OR36SDBGX Installation Instructions

ASSEMBLING THE BACKGUARD
OR THE ISLAND TRIM
It is mandatory to install the
backguard or the island trim
• Assemble the backguard or the island trim as
shown in figure 1.8 or 1.9 and fix it by screwing
the 5 screws "A" (which are already fixed on
the back of the cooktop).
• Do not remove the 3 spacers "B" already fitted
on the back of the backguard or island trim.
Fig. 1.8
Fig. 1.9
11

Fisher & Paykel OR36SDBGX Specifications

General

Brand	Fisher & Paykel
Model	OR36SDBGX
Category	Ranges
Language	English