18
2
Fitting the warming drawer:
1. Insert the drawer guides into the range guides (fi g. 2.10).
2. Gently close the drawer completely; the safety catches will automatically hook into place.
Fig. 2.10
Pressure regulator
REGULATOR COVER
NATURAL GAS
REGULATION
LP/PROPANE
REGULATION
Fig. 2.9
To set the pressure regulator (fi g. 2.9):
1. Unscrew the regulator cover.
2. Unscrew the “A” component, reverse and screw it accor-
ding to the LP/PROPANE (or NATURAL GAS) regulation.
3. Screw the regulator cover back into position on the regu-
lator.
To Next Page
Loading...
Need help?
General
