Lit. No. 95362/95363, Rev. 07 12 January 1, 2020
MOUNTING THE SPREADER
RECEIVER MOUNT SPREADER
NOTE: The spreader shall be installed according
to instructions supplied. Your local outlet is
trained to provide this service and service your
spreader with factory original parts.
1. Attach the spreader to the receiver mount with
three 1/2" x 4-1/2" cap screws.
2. Insert the assembled unit into the receiver hitch
and secure with pin (not included).
1/2" x 4-1/2"
Cap Screws
Pins not
included.
CAUTION
During removal or mounting, securely grip
spreader to avoid dropping.
To Next Page
Loading...
