17
Silent Alarms
Your Surge gently vibrates to wake or alert you with its silent alarm feature. You can set alarms using
your computer or by using the Fitbit app on a mobile device.
Silent alarms can be configured to recur every day or on particular days of the week.
NOTE: Setting multiple alarms may diminish the battery life of your Surge.
Setting silent alarms
You can add, edit, and delete silent alarms by using the Fitbit.com dashboard.
Note: can also set via mobile app. See <<ADD LINK HERE>>
1. Log in to your Fitbit.com dashboard.
2. Click the gear icon in the top-right corner of the page.
3. Click Settings.
4. Click Silent Alarms.
5. Click the Add Alarm button. <<add info on editing/deleting –brs>>
6. Enter the time you want the alarm to alert you.
7. Choose how often you want the alarm to occur:
a. Once – Your alarm will alert you at the specified time and not repeat.
b. Repeats – Choose which days you want this alarm to repeat every week.
8. Click Save.
Your changes will be saved to your Surge the next time you sync your tracker. If you want to sync the
alarm immediately, open Fitbit Connect and select Sync Now.
Dismissing or snoozing silent alarms
When your silent alarm goes off, your Surge will vibrate (if you have enabled Vibration Alerts) and the
screen will flash. Press the appropriate button on the right side of the Surge to either dismiss the alarm or
snooze it for nine minutes.
If you do not dismiss the alarm, it will repeat after approximately nine minutes.
To Next Page
Loading...