14
Method 1: Find the FlashPrint software installation package in the USB flash drive
and select the corresponding system version for installation.
Method 2: Download the latest slicing software from the official Chinese website
(www.sz3dp.com) or the official English website (www.flashforge.com) for
installation.
Import the file to FlashPrint for slicing, select the Creator 4 to connect to the
machine (or by entering the IP address or by auto-scanning, while the IP address
can be viewed in the [About] of the equipment). After slicing is completed, send
the file directly to the printer for printing.
3D printing process:
Get the model file. - Slice it with the slicing software. - Transfer the file to the
printer for printing.
4.1 File Transfer: Wi-Fi Transfer
To Next Page
Loading...
