Flashforge Cura - Select Nozzle Size

G28
M132 X Y Z A B
G1 Z50.000 F420
G161 X Y F3300
M7 T0
M6 T0
M651 S255
M907 X100 Y100 Z40 A80 B20
M104 S0 T0
M140 S0 T0
G162 Z F1800
G28 X Y
M132 X Y A B
M652
G91
M18
Nozzle Settings
Compatible material diameter 1.75
Nozzle offset X 0.0
Nozzle offset Y 0.0
Cooling fan number 0
Extruder Start G-code
M108 T0
Note: Cura sliced files are only available for printing with Dreamer’s right extruder.
Step 3: Select Nozzle Size
Once the printer is added, you may go to Settings -> Extruder 1 -> Nozzle Size to select your printer’s
nozzle size as 0.4mm.