Flashforge Guider - Work Environment Safety; Electrical Safety; Personal Safety

Guider User Guide | www.ff3dp.com
5
Notice
Safety Notice
! Notices: Read all the instructions in the manual and familiarize yourself with the
Flashforge Guider User Guide before set-up and use. Failure to comply with the
warning and instructions may result in individual injury, fire, equipment damage or
property damage.
PLEASE STRICTLY FOLLOW ALL THE SAFETY WARNINGS AND NOTICE
BELOW ALL THE TIME.
· Work Environment Safety
①
Keep your work place tidy.
② Do not operate Guider in the presence of flammable liquids, gases or dust.
③ Store Guider out of reach of children and untrained people.
· Electrical Safety
① Always use the Guider with a properly grounded outlet. Do not modify Guider
plug.
② Do not use Guider in damp or wet locations. Do not expose Guider to burning sun.
③ Do not abuse the cord.
④
Avoid using the device during an electric storm.
⑤ In case of uncertain accident, please unplug the device if you do not use it for long.
·Personal Safety
① Do not touch the nozzle and build plate during printing.
② Do not touch the nozzle less than 10 minutes after the device just finishes working.