Guider User Guide | www.ff3dp.com
adding supports intelligently cannot be realized at present. Therefore, users are always
oriented in adding the supports. As we all know, excessive supports will definitely
result in difficulty in supports removal, while limited supports cannot ensure the
stability of the model. Since FashPrint has the function of manual modification, users
can add proper supports to their models according to the daily experience and the
academic principles.
●Support Types
Linear Support Structure
：
Suitable for models with large-area overhang(s).
Features：Full coverage of supports improves the model stability. But the supports on
the surface are difficult to be removed and will definitely reduce the print quality.
Treelike Support Structure：Suitable for models with small area overhang(s).(You
are suggested printing a raft)
Features：Treelike support structure is proprietary to Flashforge Corporation. And this
structure can save support material and can be easily removed. However, compared
with the linear support structure, it’s of less stability. So you are suggested to
manually add more supports after auto-generating treelike supports.
To Next Page
Loading...
