Flashforge Hunter Quick Start Guide

This guide is only applicable to FLASHFORGE Hunter 3D printer
The User Guide is in the USB stick.
WARNING
USERGUIDE
2. To ensure the printing quality, please don't open the light shield
unless it's necessary.
3. Unused photopolymer resin needs to be stored in a dark, dry,
and cool place.
4. Please clean the finished model with isopropyl alcohol (IPA).
1. Please put on gloves while using photopolymer resin to avoid
direct contact with hands.
HUNTER
Quick Start Guide
SZ09-EN-A02

Flashforge Hunter Specifications

General

Display technology	LCD
Model file formats supported	stl
Print technology	-
Printing material	Resin
Layer thickness (min)	- mm
Maximum build size (WxDxH)	67.5 x 120 x 150 mm
Input current	1 A
AC input voltage	100/240 V
AC input frequency	50 - 60 Hz
Bundled software	FlashPrint

Weight and Dimensions

Depth	360 mm
Width	310 mm
Height	565 mm
Weight	17800 g