Need help?Do you have a question about the Flashforge Inventor and is the answer not in the manual?
Comprehensive safety guidelines and warnings for operating the 3D printer.
Conditions and guidelines for optimal printer performance and material handling.
Covers creating, slicing, and building 3D models for printing.
General information, components, accessories, terms, and specifications.
Step-by-step guide for safely unboxing the Inventor 3D printer.
Instructions for attaching the extruder assembly to the printer.
Guide on how to properly load filament into the printer.
Steps for connecting the printer to power and a computer.
Detailed steps for inserting and removing filament from the extruder.
Step-by-step guide to level the print bed for optimal adhesion.
Instructions for acquiring and installing the FlashPrint software.
Covers model loading, manipulation, supports, printing, and connectivity.
Guide to preparing and initiating single and dual-extrusion prints.
Instructions for printing via USB, SD Card, and Wi-Fi.
Techniques for using and managing support structures for complex prints.
Methods to enhance print quality through adjustments.
Tips for positioning models on the build plate for better results.
Contact details and resources for technical assistance and service.
General| Filament Diameter | 1.75 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Connectivity | USB, SD Card |
| Display | 3.5-inch touchscreen |
| Heated Bed | Yes |
| Bed Leveling | Manual |
| Operating Noise | 50 dB |
| Build Volume | 230 x 150 x 160 mm |
| Supported Materials | PLA, ABS, PETG |
| Technology | FDM |
| Weight | 15 kg |
To Next Page
