Inventor User Guide | www.flashforge.com 0086‐ 0579‐82273989
7
②
Do not touch the nozzle after finish printing.
③
Dress properly. Do not wear loose c lothing or jewelry. Keep your hair, clothing and
gloves away from moving parts.
④
Do not operate the device while you are tired or under the influence of drugs,
alcohol or medication.
· Cautions
①
Do not leave the device unattended for long.
②
Do not make any modifications to the device.
③
To lower the build plate before loading/unloading filament. (The distance between
the nozzle and build plate should be kept for at least 50mm)
④
Operate the device in a well-ventilated environment.
⑤
Never use the device for illegal activities.
⑥
Never use the device to make any food storage vessels.
⑦
Never use the device to make any electrical appliance.
⑧
Never put the model into your mouth.
⑨
Do not remove the models with force.
· Environment Requirements
Temperature: RT 15-30
℃
Moisture: 20%-70%
· Filament Requirements
Do not abuse the filament. Please make sure you use the Flashforge filament or the
filament from the brands accepted by Flashforge.
· Filament Storage
To Next Page
Loading...
