Inventor User Guide | www.flashforge.com 0086‐ 0579‐82273989
29
Chapter 6: About Software
6.1 Software Installation
6.1.1 Software Acquisition
Method 1: To get the installation package from the SD Card in the toolkit.
Method 2: Open the link below to download the installation package:
http://www.flashforge.com
Support---Downloads---Flashprint---chose the software version---download
6.1.2 Software Installation and Start-up
1. Decompress the zipped file or start the installation program, and then install the
software according to the direction.
2. Start the software with the start menu shortcut or by clicking the software icon.(See
6-1)
6-1
6.2 Exploring FlashPrint
6. 2.1 Machine Type Selection
! After starting FlashPrint, you need to select the target machine type first.
To Next Page
Loading...
