Inventor User Guide | www.flashforge.com 0086‐ 0579‐82273989
73
Others
Dimensional Adjustment
a. Enable Adjustments: Enable software to make compensation for errors.
b. External Compensation: Enable software to make compens a tion for the outer
diameter error.
c. Internal Compensation: Enable software to make compensation for the inner
diameter error.
Save as new
Allows users to save the model as a new file after parameter modification.
How to do?
After getting all the required parameters modified, click [Save as new], then a
dialogue box will pop up. Users need to enter the file name into the box, then click
[OK]. Click the drop-down menu of [Select Profile], the new added scheme can be
found in the list.
Remove
Allows the users to delete the added scheme(s). Select one of the added schemes,
click [Remove] and a dialogue box will pop up for confirmation. Click [Yes] to
remove it or click [No] to cancel the current operation.
Restore Default: Allows users to restore to the default settings.
Save Configuration: Allows users to save the present configuration.
8.1 Skills on Supports
(Reference Video：Skills on Supports
)
Support s tructures enable the printing of models with steep overhangs and
cantilevered sections. The Inventor 3D printer utilizes Fused Filament Fabrication
(FFF) technology, which works on the additive manufacturing principle of heating
To Next Page
Loading...
