Need help?Do you have a question about the Flashforge Hunter and is the answer not in the manual?
Introduces the Hunter 3D printer and its overall design.
Step-by-step instructions for filling the resin vat.
Guides on connecting power and initial activation of the printer.
Explains the printer's screen interface and operational displays.
Covers acquiring and installing the FlashPrint software.
Guides users through the installation and initial launch of the FlashPrint software.
Provides an overview of the FlashPrint software interface and features.
Explains how to select the correct printer model within the FlashPrint software.
Explains how to add, manage, and configure support structures for 3D models.
Covers print settings and options within the FlashPrint software.
Covers connecting the printer and starting print jobs.
Details how to connect the Hunter to a PC via USB or Wi-Fi.
Step-by-step guide for connecting via USB.
Step-by-step guide for connecting via Wi-Fi.
Guides on updating the printer's firmware using the software.
Guides on creating the print file (G-code) using FlashPrint.
Explains different methods for printing, including USB and Wi-Fi.
Details the process of printing directly from a computer via USB.
Guides on how to print using a USB flash drive.
Explains how to print wirelessly from a computer.
Covers post-printing steps like cleaning and handling the printed model.
General| Display technology | LCD |
|---|---|
| Model file formats supported | stl |
| Print technology | - |
| Printing material | Resin |
| Layer thickness (min) | - mm |
| Maximum build size (WxDxH) | 67.5 x 120 x 150 mm |
| Input current | 1 A |
| AC input voltage | 100/240 V |
| AC input frequency | 50 - 60 Hz |
| Bundled software | FlashPrint |
Weight and Dimensions| Depth | 360 mm |
|---|---|
| Width | 310 mm |
| Height | 565 mm |
| Weight | 17800 g |
To Next Page
