Flashforge Hunter - 5.2 Exploring FlashPrint; 5.2.1 Machine Type Selection; 5.2.2 FlashPrint Menus

Hunter User Guide | www.FlashForge.com 400-699-1063
29
5.2 Exploring FlashPrint
5. 2.1 Machine Type Selection
! After starting FlashPrint, you need to select the target machine type first.
When you start FlashPrint, a dialog box will pop up. Just need to select FlashForge
Hunter in the machine type list and click [OK]. You can also change the machine type
via clicking [Print]--[Machine type]. Please see graphic 5-2:
5-2
5.2.2 FlashPrint Menus
5-3