Flashforge Hunter - Method 2: Connect Via WiFi

Hunter User Guide | www.FlashForge.com 400-699-1063
45
5-16
Method 2
：
Connect Via WiFi
1. Turn on Hunter.
2. Turn on Wi-Fi on the Hunter. Tap [Tools]-[Setting]-[WiFi]-[WiFi ON].
3. Connect Hunter with an available WiFi signal, which is also connected by your
computer.
4. Click [Print]-[Connect Machine], it will top up box, then select Wi-Fi in the
Connect mode. Type in “192.168.0.102”and 8899 in IP address, click [Connect].
5-17
5-18