FlashPoint Zoom Mini - Safety Precautions; General Safety Guidelines

3
For Your Safety
• Always keep this product dry. Do not use in rain or in damp conditions.
• This product contains high-voltage electronic parts. Touching the
high-voltage circuit inside it may result in electric shock. Do not disas-
semble. Should repairs become necessary, this product must be sent to
an authorized maintenance center.
• Stop using this product if it breaks open due to internal shifting, falling
or strong impact. STRONG electric shock may occur if you touch the
components inside it.
• Do not re the ash directly into the eyes (especially those of babies
and pets) within short distances. Otherwise visual impairment may
occur. When taking pictures for babies, keep the ash unit at least 1
meter (3.3 feet) away from them. Using bounce ash to reduce light
intensity is also recommended.
• Do not use the ash unit in the presence oammable gases, chemicals
and other similar materials. In certain circumstances, these materials
may be sensitive to the strong light emitting from this ash unit and
re may result.
• Do not leave or store the ash unit if the ambient temperature reads
over S0°C (e.g. in automobile in the sun). Otherwise the electronic parts
may be damaged.
• Do not use any power supply other than the intended one to power
the unit.
• Do not insert metal parts into any lighting equipment.
• Do not touch the electrical contacts on the ash or battery or contact
them with any conductive materials.
• Power the unit only with two M batteries. Do not modify the power
source or input. Excess voltage can damage the unit and yourself.
• This ash has an over-heat protection circuit, rapid continuous ring
will cause the ash to slow operation and trigger a “cool down” period.
After this period, the ash will resume normal operation. You may also
reboot the ash by cycling the power o and then on.
• Do not use selective coloring.
• Do not use the ash to support other equipment. For example, do not
lift your camera by the ash.
• In case of abnormal function, sparks, excessive heat, ames or smoke,
immediately power o the unit and disconnect the battery if safely
possible. Have it checked by an authorized technician.
• Store the ash with the batteries removed. Storing the ash with the
batteries in it can lead to battery leakage.