Need help?Do you have a question about the FlashPoint ZOOM TTL FLASH R2 and is the answer not in the manual?
General| Zoom Range | 24-200mm |
|---|---|
| Flash Duration | 1/300 to 1/20000 sec |
| Color Temperature | 5600K ± 200K |
| HSS | Yes |
| Channels | 32 |
| TTL | Yes |
| LCD Screen | Yes |
| Recycle Time | 0.1-2.2 seconds |
| Battery | 4 x AA batteries |
| Wireless Range | Up to 328' / 100 m |
| FEC | ±3 stops in 1/3-stop increments |
| Wireless Communication | 2.4GHz |
| Groups | 5 |
| Compatibility | Canon, Nikon, Sony, Fujifilm |
| Manual Control | Yes |
| Swivel Head | Yes |
| Wireless Triggering | Yes |
| Dimensions | 78 x 130 x 105mm |
Identifies the physical components of the flash unit.
Details the buttons and controls on the flash unit.
Explains the display for TTL automatic flash mode.
Explains the display for manual flash mode.
Explains the display for stroboscopic flash mode.
Details battery installation and power saving features.
Provides instructions for mounting the flash unit on a camera.
Describes the functionality and process of TTL autoflash.
Explains how to adjust flash exposure compensation in TTL mode.
Enables flash synchronization with all camera shutter speeds.
Creates a light train following the subject with slow shutter speeds.
Details how to adjust flash output manually in increments.
Provides formula to calculate shutter speed for stroboscopic effects.
Explains how to switch between normal and wireless flash modes.
Details slave unit setup, master mode, and channel communication.
Guides through TTL autoflash setup with one slave unit.
Covers positioning, readiness checks, and flash operation tests.
Details manual flash settings for multiple wireless groups.
Explains stroboscopic lighting for wireless setups.
Illustrates positioning for a single slave unit.
Explains setting up multiple slave units in groups.
Explains wireless control using the R1 Transmitter.
Details synchronous triggering via sync cord.
Describes how to use the flash for bounce lighting.
Explains how to create catchlights using the diffusion panel.
Details how to adjust flash coverage manually or automatically.
Lists camera models compatible with the flash unit.
Provides guidance on device care and servicing.
To Next Page
