10
Press <MODE> button so that
< MULTI > is displayed.
times.
• Press Function Button 3
< MULTI >
times. Turn the Select Dial to set
the number.
• Press Function Button 4
<Hz>
frequency. Turn the Select Dial to
set the number.
•
press <SET> button and all the
settings will be displayed.
Turn the Select Dial to choose a
2
3
Flash Mode – Multi / Stroboscopic Flash
single photograph.
Calculating the Shutter Speed
speed and set it with the camera.
Number of Flashes / Flash Frequency = Shutter Speed
-
quency is 5 Hz, the shutter speed should be at least 2 seconds.
-
-
• Using a tripod and a remote control is recommended.
•-
•
•
continue until the shutter closes or the battery is exhaust-
following table.
To Next Page
Loading...
