21
Troubleshooting
If there is a problem, refer to this Troubleshooting Guide.
The Camera Flash cannot be charged.
• The battery is installed in the wrong direction.
• Install the battery in the correct direction.
•
• If < > appears and blinks on the LCD panel, replace the
batteries immediately.
The Camera Flash does not re.
•
• Attach the camera’s mounting foot securely to the camera.
• The electrical contacts of the Camera Flash and camera
are dirty.
• Clean the contacts.
The power turns o by itself.
•
•
wake up.
•
unit will enter sleep mode if it is set as slave.
•
Auto zoom does not work.
•
•
The ash exposure is underexposed or overexposed.
• You used high-speed sync.
•
displayed.
• You used Manual Flash mode.
•
Photos have dark corners or only parts of the target subject
are illuminated.
•
•
To Next Page
Loading...
