11
Wireless Flash Shooting: R2 Radio (2.4G)
Transmission
•
•
TTL/Manual/Multi mode will be automatically sent to the slave
units. So the only thing you need to do is to set the master
unit for each slave group without any operation for the slave
units at all during the shooting.
• TTL /M /Multi / OFF
set as a master unit.
As a slave unit, this Zoom TTL Speedlite for Olympus /
Panasonic is compatible with Flashpoint R2 series transmitters
• Even with multiple slave units, the master unit can control
all of them via wireless.
• In this user manual, “master unit” refers to the camera
master unit.
1. Wireless Settings
Press < > button so that
< > is displayed on the LCD panel.
If < MULTI> is displayed, it means
Multi mode is ON.
The backlight now turns green.
2
Master Unit Setting
Maximum Stroboscopic Flashes:
To Next Page
Loading...
