CONTENTS
Section 1 Information and Requirements PAGE
1.0 Appliance Information 3
1.1 Conditions of Installation 4
1.2 Flue and chimney suitability 4
1.3 Fireplace / surround suitability 5
1.4 Shelf position 5
1.5 Chimney inspection 5-6
1.6 Fire place opening / catchment space 6
1.7 Fitting to Chair bricks 8
1.8 Precast Flues 8
1.9 Metal Flue boxes 8
1.10 Hearths 9
1.11 Spillage Monitoring System 9
Section 2 Installation of Fire
2.1 Unpacking the fire 10
2.2 Installing the fire box 10-16
2.3 Gas tightness and burner pressure 17
Section 3 Assembling Fuel Bed and Commissioning
3.1 Assembling the ceramics and fuel bed 18-21
3.2 Fitting the Caress trim 22
3.3 Fitting the fret 23
3.4 Lighting the appliance 24
3.5 Checking for clearance of combustion
products 25-26
Section 4 Maintenance
4.1 Removal of the Burner Assembly 27
4.2 Removal of the Battery Ignitor 28
4.3 Repacing the Battery 28
4.4 Removing the Oxy-Pilot Assembly 28
4.5 Replacing the Control Cable 29-30
This appliance is manufactured by:-
BFM Europe Ltd,
Trentham Lakes,
Stoke-on-Trent,
ST4 4TJ
2
To Next Page
Loading...
