CONTENTS
PAGE
Section 1 Information and Requirements
1.0 Appliance Information 3
1.1 Conditions of Installation 4
1.2 Fireplace surround & suitability 4
1.3 Flue Terminal Position 5
1.4 Shelf position 6
1.5 Hearths 6
Section 2 Installation of Fire
2.1 Unpacking the fire 6
2.2 Preparation of the wall 7
2.3 Preparation of the flue hole 8
2.4 Preparation of the flue pipes 9
2.5 Installation of the gas supply 10-11
2.6 Securing of the combustion chamber to the wall 11-12
2.7 Fitting the terminal guard 12
2.8 Removal & refitting of the glass frame 13
Section 3 Assembling Fuel Bed and Commissioning
3.1 Fitting the fuel bed 14
3.2 Lighting the appliance 15-16
3.3 Fitting the fender 17
3.4 Fitting the canopy 17
Section 4 Maintenance
4.1 Removal of the Burner Assembly 18
4.2 Removal of the Control Valve 18-19
4.3 Removal of the Battery Pack 19
4.4 Removal of the Pilot Assembly 19
4.5 Removal of the Touch Control Switch 19-20
The model no. of this appliance is on the rating plate, which is affixed to the
battery pack retaining bracket on the front right hand side of the fire. The product
is manufactured by:-
BFM Europe Ltd, Trentham Lakes, Stoke-on-Trent, Staffordshire, ST4 4TJ
2
To Next Page
Loading...
Need help?
General
