Fleck 4600 - Valve Specification

5600/1600
4600 - 5600
11
Valves complying european regulations:
- Nr. 89/336/EEC, “Electromagnetic compatibility”,
- Nr. 73/23/EEC, “Low voltage”
Installation N°
Valve serial N°
Tank size
Resin type
Resin volume
System capacity m
3
°tH
Inlet water hardness °tH
Water hardness after mixing valve °tH
Brine tank size litres
Quantity of salt per regeneration Kg
VOLTAGE
230V/50Hz
24V/50-60Hz with transformer
24V/50-60Hz without transformer
REGENERATION CYCLES ACCORDING TO PISTON TYPE
1 - VALVE SPECIFICATIONS
4600/1600
VALVE TECHNICAL CHARACTERISTICS
VALVE TYPE
m
3
SET REGENERATION
Meter immediate
TRIGGERING
m
3
Meter delayed
DaysTimeclock
m
3
/dayFast Regeneration
HYDRAULIC SETTINGS
Injector size
Drain line flow control (DLFC) GPM
Brine line flow control (BLFC) GPM
1,4 bar (20 PSI)
Pressure regulator
Without
2,1 bar (30 PSI)
Standard piston LWU piston Fast
CYCLE regen piston
White Grey Blue
Preliminary rinse X
Backwash X X X
Brine draw and slow rinse X X X
Rapid rinse X X X
Resin settling X
Brine refill X X X
E
N
G
L
I
S
H