FLIGHT CONTROL SENSING DIRECTION TEST
Aircraft
Movement
Proper Control
Surface Deflection
AILERONELEVATOR
RUDDER
Perform a test of the gyro system to verify the corrections made for a given movement are correct. If any of the tests do not result in the
correct reaction for the airplane's gyro system, DO NOT FLY THE AIRCRAFT, and contact us via email at support@flexinnovations.com.
The flight control system activates with RF broadcast. Perform these tests in the Beginner Profile (6-axis) for better visibility, and then again
in the Advanced Profile. Please note that the control surfaces will ALWAYS try to correct the aircraft to level in the Beginner Profile but will
ONLY correct while the aircraft is ROTATING in the Advanced Profile.
Yaw correction is done with the motors and will only be active when the aircraft is armed. Either two or four motors may activate
depending on the Flight Configuration selected and throttle position.
33
To Next Page
Loading...
