LANDING GEAR INSTALLATION
23
Required Tools and Fasteners:
#1 Phillips Screwdriver
(4) M3x8 Phillips Head Self-Tapping Screw
1.
2.
Locate the main landing gear, four M3x8 self-tapping screws and two plastic main gear retaining plates. Insert the main landing gear
into the fuselage slots.
Place the retaining plates over the landing gear wire in the slot in the fuselage, noting that their orientation matches the landing gear
wire shape. Secure them in place with two M3x8 self-tapping screws. Do not over tighten.
(QTY 4)
To Next Page
Loading...
