13 of 59 GH-24, GH-30, GH-45, GH-60 Rev.003
3. To turn the motor on press the green start button.
4. Next, you need to confirm you are in the proper gear setting on both the arm’s gearbox and the
display; in this case gear two.
5. Once you confirm the gear settings match, press validation and you can begin tapping.
6. When switching gears, once again validate you are in the proper gear setting on both the arm’s
gearbox and the display. You will need to re-press the validation button before you begin tapping
again.
To Next Page
Loading...