FlexArm GH-24 User Manual

1 of 59 GH-24, GH-30, GH-45, GH-60 Rev.003
GH-24, GH-30, GH-45, GH-60
INSTALLATION & OPERATIONS
MANUAL
FlexArm Inc.
Division of Midwest Specialties, Inc.
851 Industrial Drive
Wapakoneta, Ohio 45895
419-738-8147
800-837-2503 (toll free)
www.flexarminc.com

FlexArm GH-24 Specifications

General

Brand	FlexArm
Model	GH-24
Category	Industrial Equipment
Language	English

Summary

Safe Operation

Safety Precautions

Essential safety guidelines for operating the equipment, including personal protective equipment and safe practices.

Safety Standards

Details on safety standards related to hydraulic pressure, workpiece securing, and electrical connections.

Electrical Installation

Arm Installation

Arm to Power Pack Installation

Start Up Procedure

Shut Down Procedure

Improper Shutdown Handling

Guidance on how to recover from or prevent improper shutdown sequences.

Use of Tap Lubricator System

Use of Multi-Position Head

Operating Instructions

Adjusting Tap Holder Torque Setting

Counterbalance Adjustment

Parts Breakdown: 2 Speed Gearbox

Parts Breakdown: GHM-24 Multi-Head

Parts Breakdown: GHM-30, 45, & 60 Multi-Head

Parts Breakdown: Semi Tap Lubricator

Removing the Chuck

Cylinder Replacement

Rear Replacement Instructions

Step-by-step guide for replacing the rear cylinder on FlexArm units.

Front Replacement Instructions (GH-24, GHM-24, GH-30, GHM-30, GHR-30)

Instructions for replacing the front cylinder on specific FlexArm models.

Front Replacement Instructions (GH-36, GH-45, GHM-45)

Instructions for replacing the front cylinder on GH-36, GH-45, and GHM-45 models.

Front Replacement Instructions (GH-60)

Instructions for replacing the front cylinder on the GH-60 model.

Hydraulic Gearbox Disassembly

Maintenance

Base Mount Lubrication and Bolt Checks

Troubleshooting

Tap Not Maintaining Perpendicularity

Troubleshooting steps for when the tap does not maintain perpendicularity.

Insufficient Power to Drive Tap

Steps to diagnose and resolve issues where the unit lacks power to drive the tap.

Motor Stopped Completely

Balls in Tap Holder Breaking

Semi Tap Lubricator Troubleshooting

Alignment Check List