Flexim FLUXUS F808 F1 Series User Manual

FLUXUS F808, F809 A Menu structure
174 UMFLUXUS_F808_8091V1-2-1EN, 2019-08-23
change of the baud rate, parity or number of stop bits x
SYSTEM settings\Miscellaneous
selection of the display for the setting of the contrast
setting of the contrast of the display
confirmation that a HotCode has to be entered
input of a HotCode
error message that an invalid HotCode has been entered
Instrum. Inform.
selection of the displays for information about the transmitter
display of the type, serial number and max. available data logger memory x
display of the type, serial number and firmware version with the date (dd - day,
mm - month, yy - year)
x
Print Meas.Val.
selection of the displays for the transmission of stored measured values to a PC
start of the transmission of measured values
This display will only be indicated if the data logger contains measured values
and the transmitter is connected to a PC via a serial cable.
display of the data transmission progress
Delete Meas.Val.
selection of the displays for the deleting of stored measured values
confirmation for the deleting of measured values
This display will only be indicated if measured values are stored in the data logger.
INIT-
resistant
>BAUD< parity st
1200 EVEN 1
SYSTEM settings↕
Miscellaneous
SETUP DISPLAY
 CONTRAST 
Input a HOTCODE
no >YES<
Please input a
HOTCODE: 000000
INVALID HOTCODE
hotcode: 000000
Special Funct. ↕
Instrum. Inform.
F80X-XXXXXXXX
Free: 18327
F80X -XXXXXXX
V x.xx dd.mm.yy
Special Funct. ↕
Print Meas.Val.
Send Header 01
................

................
Special Funct. ↕
Delete Meas.Val.
Really Delete?
no >YES<

Flexim FLUXUS F808 F1 Series Specifications

General

Brand	Flexim
Model	FLUXUS F808 F1 Series
Category	Measuring Instruments
Language	English