FlexRadio Systems FLEX-5000 Series User Manual

O P E R A T I O N C H A P T E R 6
Voice Transmission Operation
The following procedure outlines how to setup quickly for voice transmission operation (SSB, AM, or
FMN). If something in this procedure is unclear, please contact us, as we would like this to be as simple
as possible.
Figure 148 Front Panel Controls Used for Basic Voice Operation.
Please use Figure 148 to identify the controls referenced in the following step-by-step instruction. For
consistency we have used the same control identifiers as in Figure 33 on page 50 and for clarity we
have left out any identifiers of controls not referenced.
Note: In this chapter, we will only describe basic operation using the main
RX1 receiver.
[The rest of this page has been left blank intentionally]
160  2003-2008 FlexRadio Systems

FlexRadio Systems FLEX-5000 Series Specifications

General

Brand	FlexRadio Systems
Model	FLEX-5000 Series
Category	Transceiver
Language	English