FlexRadio Systems FLEX-5000A User Manual

6 Operation
This chapter is intended to provide the user with a clear understanding of how the FLEX-5000 should be
used when performing basic operations such as Powering Up or making a voice transmission. We chose
to use this section in this way in lieu of listing all of the features of the radio since the feature list would
essentially repeat the information given in the three preceding chapters. Please refer to those chapters
for complete feature descriptions and how to use the controls.
Note 1: For consistency we will use the same control identifiers as used in
Figure 33 on page 50. For clarity we will leave out any identifiers of
controls not referenced in the relevant section
Note 2: If you have any questions, issues or problems operating PowerSDR
and/or the FLEX-5000, you may be able to find the solution on the
Support Pages (http://support.flex-radio.com/) of our website, in our
Knowledge Center (http://kc.flex-radio.com/search.aspx), or through
our highly active Reflector. (search for reflector on our Knowledge
Center at http://kc.flex-radio.com/search.aspx). If none of these
sources provide you the assistance required, please contact FlexRadio
Systems using the information provided on the Contact page of our
website (on our website www.flex-radio.com click About FlexRadio
and then Contact Us).
[The rest of this page has been left blank intentionally]
155  2003-2008 FlexRadio Systems
Chapter
6

FlexRadio Systems FLEX-5000A Specifications

General

Brand	FlexRadio Systems
Model	FLEX-5000A
Category	Transceiver
Language	English