5 –Camera Controller
A6700sc/A6750sc User’s Manual
23
NUC Controls
NUC Info. Displays camera parameters and statistics related
to the selected NUC
Perform NUC. Starts the NUC Wizard.
Updates the current NUC to flash memory
Load a NUC from flash to RAM memory.
Unload NUC from RAM memory. No on-camera NUC will be
applied to the data.
Apply NUC to Analog video data
Apply NUC to Digital output (GigE, CameraLink)
Displays all pixels marked as “bad” as white dots on both the
analog and digital outputs.
When enabled, the camera will automatically drop the internal
flag and perform a NUC Offset Update when selected criteria
are met. The NUC update can be triggered on demand, by a
change in the internal temperature sensor or by a timer
Displays a list of NUCs stored in flash memory. User can
delete NUCs from flash memory as well as upload/download
NUCs (.NPK files) from the host PC.
Displays options for loading NUCs.
To Next Page
Loading...
