8.9 Auto-adjusting an image
General
For best image brightness and contrast, auto-adjust the camera before you measure
a temperature and save an image.
Procedure
If the letter M is displayed in the bottom right corner of the screen, push Man/Auto
one time to auto-adjust the image.
NOTE
If the letter A is displayed in the bottom right corner of the screen, the camera is al-
ready auto-adjusted for best image brightness and contrast.
8
36 Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007
8 – Operating the camera
To Next Page
Loading...
Need help?
General
