8.20 Moving images to a PC
General
You can move one or many images from the camera to a computer.
Overview of
methods
You can use two different methods when you move images from the camera to a
computer:
■
Method 1: Move images when the camera works as a USB disk. With this method
you don’t need to install ThermaCAM™ QuickReport on your computer.
■
Method 2: Move images when the camera is connected to a PC with ThermaCAM™
QuickReport. ThermaCAM™ QuickReport contains features for image handling
and creation of PDF reports.
■
Method 3: Use the SD Memory Card to move images (applies only to models
with SD Memory Card).
Equipment
To move the images from the camera, you need this equipment:
■
A computer with an IBM-PC, Mac or Linux operating system
■
The program ThermaCAM™ QuickReport (Method 2 only)
■
A USB cable
Method 1
Follow this procedure to move images when the camera works as a USB disk:
To display the main menu, push Menu.1
To select , push the navigation pad up/down.
2
To enable the Settings menu, push Select.3
To select USB cable, push the navigation pad up/down.4
To select Standard, push the navigation pad up/down.5
Click OK.6
Connect the camera and use Windows® Explorer to drag-and-drop images
from the camera to the computer.
7
NOTE
When you select Standard a help text is displayed in the camera. Read the help text
carefully.
8
52 Publ. No. 1558299 Rev. a200 – ENGLISH (EN) – February 12, 2007
8 – Operating the camera
To Next Page
Loading...
Need help?
General
