43
Web Configuration
4. Configure the weekly schedule. The schedule is divided into 3 periods,
and motion detection will be enabled in all times during all 3 periods.
5. Cl
ick Motion Ar
ea, and configure up to 8 motion detection areas:
• Select Area Motion or Ar
ea Mask to configure motion detection areas.
• Area Motion allows you to select areas where motion detection is enabled.
• Area Mask enables the entire image for motion detection, and allows you
to select areas to disable motion detection.
• Right-click to delete the last created area.
6. Under Sensitivity, sel
e
ct the sensitivity for motion detection: Low,
Medium, or High.
7. Click OK to save your settings.
8.9 Local Record
Local Record contains the following sub-menus:
• Record Policy
• Record Directory
To Next Page
Loading...
