59
Web Configuration
8.17 Sensor Configuration
The Sensor Configuration menu is used to adjust camera image settings.
To configure camera image sett
ings using the Sensor Configuration menu:
• Log into the camera using a web browser, and from the Live Video page,
right-click on the video area and select Sensor Config.
• Click Sav
e to save setting changes.
• Click Reset to revert to the last saved changes.
• Click Factory Setting to revert all camera sensor settings to factory
defaults.
• Click Cancel to exit.
TIP: Hold the mouse over the tabs to see the full name of the tab.
Right-click in the video area
and select Sensor Config
To Next Page
Loading...
