FLIR DNV14UX2

52
Web Configuration
8.11.1 DDNS
The DDNS sub-menu allows you to configure DDNS settings. Before
configuring DDNS settings, you must register the camera for a free FLIR
DDNS account (see “7. Configuring Remote Connection” on page 19).
To configure DDNS settings:
1. Cl
ick Netw
ork Service>DDNS.
2. Check Enable
DDNS.
3. Configure the f
ollowing:
• Provider: Select
FLIRDDNS.
• Domain Name: Enter the Domain Name you received from the
confirmation email you received after you created your DDNS account.
NOTE: Connect t
o
your camera using a web browser by entering http://,
the Domain Name, colon, and then the HTTP port. For example, if the
Domain Name is
tomsmith.myddns-flir.com , use the address 
http://tomsmith.myddns-flir.com:80 .
• User Name: Enter the User Name you received in the confirmation email.
•
Password: Enter the Password you received in the confirmation email.
4. Click OK
to save settings.
8.12 Service Center
Service Center contains the following sub-menus:
• SMTP
• Alarm Center (not supported)