48
Web Configuration
• Use All Space: Check to enable the camera to record until the NAS is full.
Uncheck to limit the amount of space the camera can record on and enter
the amount of space (in MB) available to the camera under Free Space.
5. Click OK.
6. Set up recording using the Record Policy sub-menu (see “8.9.1 Rec
ord
Directory” on page 44). To access your recordings, use Syncro-V or
manually access your NAS device.
NOTE: On the Rec
o
rd Directory page, Status will be OK when NAS is
selected if NAS is accessible and all settings have been entered correctly.
To Next Page
Loading...
