FLIR Duo Pro R - Video Output

FLIR Duo Pro R User Guide
Duo Pro R User Guide, Rev. 1.0
Information on this page is subject to change without notice
30
Figure 17: Isotherm Adjustment menu
Try setting units to “percent” and low/med/high to 80, 90, 98 to highlight the highest-temperature
pixels in each scene.
Play around with these settings for your specific application to find the best palette and setting
combination!
5.2.1.5 Video Output
• Analog Video Format: Select NTSC or PAL as the format of the analog video that is output
to the Accessory Port. This setting does not affect the format of the video that is saved to the
microSD card.
• HDMI: Select the format of the video that is output to the HDMI port. Options are 720p60
(1280x720 60Hz), 1080p30 (1920x1080 30Hz), and 1080p60 (1920x1080 60Hz) formats.