How to set up your FLIR FX camera
5
10. Wait for the app to automatically connect your smartphone to the camera’s Wi-Fi
network.
NOTE
In some cases, the app may not be able to connect your phone to the camera’s Wi-Fi network. To
continue the setup, you will need to select the color of the LED on the back of the camera. You’ll
then be prompted to connect your phone to the camera’s Wi-Fi network (the network will have a
name similar to “FX-fxvdb30b2744”).
NOTE
If you are using the outdoor camera, the app will prompt you to remove the camera from the out-
door housing to check the LED color.
To Next Page
Loading...
Need help?
General
