How to set up your FLIR FX camera
5
5.4 FLIR FX iPad® setup
1. Download the FLIR FX app from the App Store.
2. Connect the included USB cable to the power adapter. Connect the other end of the
USB cable to the camera and connect the power adapter to a power outlet.
NOTE
• The REC LED will glow orange to indicate the camera is charging. It will glow green when the
camera is finished charging. The battery will take 6 hours to fully charge.
• You can connect the power adapter to either the USB port on the camera or camera stand. Do
not connect a USB cable to both the camera and the stand at the same time.
3. Camera turns on automatically when power is connected and REC light will turn on. If
camera does not turn on, press the power button to turn on the camera. The camera
will start up and the
LED on the back of the camera will glow orange.
#LX400067; r.27354/27358; en-US
28
To Next Page
Loading...
Need help?
General
